Quadro 45L - Stainless Steel Laundry Trough

65.50 (cm)
45.50 (cm)
64.50 (cm)
Calculated at Checkout
  • Quadro 45L - Stainless Steel Laundry Trough
  • Quadro 45L - Stainless Steel Laundry Trough
  • Quadro 45L - Stainless Steel Laundry Trough
  • Quadro 45L - Stainless Steel Laundry Trough
MSRP: $450.00
— You save $67.50

From the sophisticated, functional Quadro range comes this modern 45 litre laundry tub, featuring a single square bowl and a beautiful brushed stainless steel Finish, guaranteed to make a big impact on any laundry – in both looks and practicality. Constructed by hand with great attention to detail, it is fitted with sound deadening pads and coated with a special anti-condensation paint underneath to make use more enjoyable and longer lasting.

  • 530mm long x 500mm wide x 230mm deep
  • Can be either inset or undermount into the benchtop
  • Excellent sized bowl for a laundry tub – not too large but not too small either
  • Designed with rounded square corners, making it very easy to clean
  • Constructed from 1.2mm thick (very thick for a sink) 304, 18/10 grade stainless steel for a sturdy, durable trough
  • 45 litre maximum water capacity
  • Comes with a pre-punched centred tap hole for your convenience - if you wish to cover the tap hole, please select the Tap Hole Cover option above
  • Supplied with one 90mm basket waste plug
  • It is pictured with the Mercury Chrome Sink Mixer above

This product can be partnered with our range of Sink Mixers, we recommend based on the size of this sink our Pullout Sink Mixer range.

Cleaning Guide

About Our Stainless Steel:

For residential purposes, most stainless steel comes in one of two grades, called 304 and 316.  
304 stainless steel is the most widely used, making up about 50% of all stainless steel produced, as it has very good corrosion resistance and is easily shaped. 304 stainless steel is always composed of at least 50% iron and less than 0.8% carbon, however other components can vary. The most common two variants are referred to as 18/8 and 18/10. That is, 18% Chromium, 8% Nickel or 18% Chromium, 10% Nickel. The extra nickel content in 18/10 stainless steel provides a higher resistance to corrosion, while also giving a shinier appearance to the metal. Because of these benefits all of the stainless steel sinks available from The Sink Warehouse are 304 Stainless Steel, with an 18/10 mix.

Stainless steel gains its corrosion resistance from a thin layer of chromium oxide that builds up on the surface of the metal, protecting it from any further oxidisation. It is important to keep this layer clear of dirt and other impurities to maximise the lifespan of your sink. Cleaning stainless steel regularly is key to a long lifespan and to preserve the high quality appearance.

Day to Day Care:

After use, the sink should be wiped with a soft cloth, rinsed and wiped dry. When the mains water is hard, it is particularly important that the steel is wiped dry, as this prevents the build up of a greyish film discolouration on the steel.

Cleaning Aids:

Avoid using harsh cleaning tools such as hydrochloric acid, steel wool, or metal scrubs. These will scratch the sink and leave it looking dull and worn.

A diluted mixture of vinegar and water (1:10) will remove any mineral deposits that may build up.

If a steel polish is used to clean the sink, be sure to use a soft damp cloth (microfibre works well) and wipe with the grain of the steel instead of across the grain. Rinse the polish with water when Finish and buff with a soft, static proof cloth.

What to Avoid:

Dropping Hard Materials:

Try to avoid dropping hard materials in the sink. Inevitably stainless steel will scratch, however to minimise this as much as possible, be cautious when using materials such as glass, ceramic, stone or abrasives.


Containing hydrochloride will attack stainless steel and cause pitting and staining.

Silver Dip Cleaners:

These contain strong acids which attacks stainless steel. The first sign of this is rainbow stain which turns dark grey and which cannot be removed.

What if my Sink is Rusting?

The stainless steel used at The Sink Warehouse contains an element known as Chromium which makes the sink rust resistant. The sink may appear to be rusting if iron particle from other materials have come in contact with your sink and bind to the sinks surface at any point from manufacturing to installation. When these iron particles react with water, they will begin to rust, which is what you will be seeing. Any metal cleaner such as Autosol (supplied by The Sink Warehouse) will take this off with no trouble.

Important Notice

 All stainless steel products are constructed from 304, 18/10 grade stainless steel

 It is strongly recommended that any cut-outs are made based on the individual product dimensions 

 All pictures and drawings on this brochure are representational only, changes in the product may have occurred since time of print. 

 All prices on this brochure and The Sink Warehouse website are subject to change without notice.

Shipping Information


delivery-icon-truck.jpg   This Product can be shipped Australia Wide.

delivery-icon-cal.jpg  Handling and delivery can take up to 7-10 business days.

delivery-icon-box.jpg   Fees will be calculated at checkout based on region and item weight.

View AllClose
Warranty Information

Trough: 25 Year Replacement Product Warranty* / 2 Year Parts & Labour

Click here for The Sink Warehouse Warranty Policy

*Product replacement does not include installation or removal of the original product.

Check product for damage before installation - installing a damaged product voids warranty.

The Sink Warehouse has over 26 Years experience in After Sale Care & Service, It is this Sink Warehouse care that sees so many customers come back to us.


View AllClose
Additional Information
500 mm
530 mm
230 mm
Brushed Stainless Steel
Stainless Steel
One Bowl
25 Year Product Warranty
View AllClose