null

Billi - Standard Installation of Billi Filtered Drinking Water Systems

SKU:
TAQB970207
Availability:
InStock
Shipping:
Calculated at Checkout
GROUP:
Services
$399.00
Description

Standard Installation for Residential or Commercial filtered drinking water Systems

Residential units: Billi Home BC, BA, C

Commercial units: Eco, Quadra, Sahara, Alpine

Does not apply to ‘Plus’ systems or systems with Sparkling water.

 

A Billi accredited technician will provide Standard Installation to your residential or commercial use premises.

Standard Installation Requirements regarding water and power supply must be met prior to the agreed date, or a callout fee will be charged for any and each re-attend(s) required.

Standard Installation DOES NOT include any stone cutting services, nor benchtops greater than 48mm thick. The services of a qualified stone mason should be engaged.

To learn more about Installation, please review the Data Sheet and Installation Guide relevant to your selected Billi product, these can be found on the specific product page or downloaded HERE.

 

**Please Note**

Benchtop Limitations:

Standard Installation DOES NOT include installations on granite or natural stone bench tops nor bench tops that are greater than 48mm in thickness.

Font installation is not considered to be part of a Standard Installation and is therefore not included in this offer.

If extra parts such as extension kits or replacement valves or connections are required during the installation, this will be at the discretion and additional cost of the customer.

 

Electrical and Plumbing Requirements:

Sufficient power and plumbing supply must already be in place prior to Installation. Any additional electrical or plumbing requirements outside the standard requirements for a Billi unit will be at the customer’s expense. Power and water must be ready for connection at final install location, please refer to product install guide for further information.

Failure to prepare the site for the agreed date will incur a standard callout fee for any and each re-attend(s) required.

 

Installation Plumbing Requirements for Billi’s Multifunction Mixer Tap

For the installation of your Billi Multifunction Mixer Tap, please note the following:

  • A domestic Cold and Hot mains supply via separate ½” BSP (15mm) isolation valves must be pre-installed in an easily accessible position.
  • The under-bench system requires an additional Cold mains supply ½” BSP (15mm) isolation valves, bringing the total to three isolation valves.
  • All isolation valves must be pre-installed by a licensed plumber before a Billi technician can be booked to install and commission your new Billi unit.

Billi recommends the underbench system to be installed with it’s own isolation valve, however this may not be required in all cases.  This should be discussed with your qualified installer.

 

Locations:

The standard Installation delivery area is limited to 50KM from metro areas of Melbourne, Sydney, Brisbane, Canberra, Darwin, Perth, Adelaide & Hobart.

 

 

 

Important Inforation

 • All pictures and drawings are representational only, changes in the product may have occurred since time of print. 

 • All prices on The Sink Warehouse website are subject to change without notice.

Shipping Information

delivery-icon-truck.jpg   This Product can be shipped Australia Wide.

delivery-icon-cal.jpg  Handling and delivery can take up to 7-10 business days.

delivery-icon-box.jpg   Fees will be calculated at checkout based on region and item weight.

Sink Mixer FAQ

How to choose the right mixer, Thanks to The Sink Warehouse.

sink-mixers.jpg

Sink Mixers

Simple design, kitchen sink mixers allow you to mix hot and cold sources of water by controlling a single handle. Stylish and minimal design, kitchen mixer taps offer a low-profile look for your kitchen.

Find our range linked here.

pullout-sink-mixers.jpg

Pull Out Sink Mixers

Pull out taps allow you to pull out the tip of your tap head on a retractable hose. This simple functionality allows easy cleaning of bigger items like pots, pans and your sink area itself.

Find our range linked here.

pullout-sink-mixer-with-veggie-spray.jpg

Pullout Sink Mixer With Veggie Spray

Spray mixer taps are similar to kitchen mixer taps, but with one primary difference. Spray mixers allow you to change the way the water ejects from your tap head. When cleaning veggies for example, you might switch the spray head to a wider spray setting, which will give you greater water spread

Find our range linked here.

gooseneck-sink-mixers.jpg

Gooseneck Sink Mixers

Gooseneck mixers make a grand statement in your kitchen and on your benchtop. Designed to elevate your water source, gooseneck mixers make it easier to clean large pots and pans that wouldn’t normally fit under a shorter mixer.

Find our range here.

 

Product Information Sheet

COMING SOON

View AllClose